Netgear N300 WiFi Range Extender Setup
With a convenient wall-plug design, the Netgear N300 range extender boosts the internet speed of your existing gateway up to 300Mbps. It works perfectly with any standard WiFi router and is ideal for HD streaming and lag-free gaming. Moreover, the external antennas provide enhanced performance so that you can get the most out of your home network. But, achieving all this requires you to perform Netgear N300 WiFi range extender setup. If you are unaware of the instructions for installing this amazing product by Netgear, then stick to reading. Here, we’ve talked about not only one, but three methods that can help you perform Netgear N300 setup with ease.
Different Methods to Perform Netgear N300 Setup
As mentioned earlier that this guide will make you aware of three methods to set up your N300 range extender, this section focuses on a brief introduction to all those methods.
A. Manual Method: It is a browser-based approach in which the user needs to access the web graphical user interface of the range extender using its web www.mwifexty.net or IP address. The setup process is carried out with the help of a computer or laptop.B. Nighthawk App: The second method through which one can perform Netgear N300 WiFi range extender setup is using the Nighthawk app. This method is used by users who want to make their extenders up and running via a mobile phone.
B. Nighthawk App: The second method through which one can perform Netgear N300 WiFi range extender setup is using the Nighthawk app. This method is used by users who want to make their extenders up and running via a mobile phone.
C. WPS Method: The WPS approach of setting up a Netgear N300 range extender is considered the easiest one. The user only needs to place the extender at a specific location and push a button. That is why it is also known as the Push-button configuration method.
About Netgear N300 WiFi Range Extender Manual
Netgear offers a vast variety of products and each product comes with a user manual. With that said, the Netgear N300 WiFi range extender manual also comes along with the device. It consists of every single detail about the extender. So, whether you want to set up the extender, update its firmware, or adjust bandwidth settings, all you are supposed to do is refer to the instructions mentioned in the user manual. But, at times, the steps provided in the user manual are difficult to understand. Keeping that in mind, our experts have broken down the process of setting up the N300 range extender into a few simple steps. However, you can also refer to the sections discussed below if you’ve lost the Netgear N300 WiFi range extender manual.
Netgear N300 WiFi Range Extender Setup | Manual Method
Before starting the installation process, you are required to unbox your WiFi device and ensure that you’ve received the N300 extender, external antennas, and Netgear N300 range extender user manual. Thereafter, follow the steps given below to install your range extender. However, if you feel stuck at any point, do not hesitate to reach out to our experts:
- Connect the extender’s antennas and plug your device into a working wall socket in your house.
- Are the LED lights on your N300 extender glowing? If yes, then it is a sign that it is ready to establish a connection with the main gateway.
- Create a connection between both devices using an Ethernet cable.
- Now, access the extender’s default IP 192.168.1.250 or web address using an upgraded web browser.
- On the next window, insert the default values of your extender’s credentials and hit Log In.
- The BASIC Home screen will show up with some instructions that will take the charge of guiding you with the rest of the setup process.
- So, follow them and complete the Netgear N300 WiFi range extender setup via the manual method.

Netgear N300 Setup | Nighthawk App
This section will reveal how to install your N300 WiFi device with the help of the Nighthawk mobile application. Thus, you are advised to install the same on your mobile device before giving a shot at the steps given below. However, avoid installing the older version of the app as doing so might result in the Netgear extender setup issues:
- Create the extender-router connection as mentioned in the manual method.
- Launch the Nighthawk app and complete the creation of the Netgear account.
- Perform Netgear N300 login using the extender’s default values.
- The moment you see the Netgear N300 setup wizard, walk through the on-screen prompts.
- The extender setup process will get completed.
Netgear N300 WiFi Range Extender Setup | WPS Method
To achieve setup success via this approach, you need to ensure that your host router supports the WPS configuration. If it does, then the following instructions can be given a shot:
- Consider plugging the N300 extender into a socket near the host router.
- The distance between both devices needs to be safe.
- Now, start searching for the WPS button on your Netgear N300 and press it.
- You ought to do the same with your host router too.
- The Netgear wireless range extender setup process completes.
Need More Help?
With the hope that you will be able to complete the Netgear N300 WiFi range extender setup process easily using any of the approaches discussed above, we are putting a full stop to this guide. But, remember that our experts have always got your back in case you face any difficulty while doing Netgear N300 setup.
Disclaimer: mwifexty.net is an independent Service and Support provider for a large variety of third party products, brands, and services. Any use of Trademarks, Brands, Products, and Services is referential and we hereby, disclaim any association, affiliation – direct or indirect, or representation in any form, of any such brand, product, or service. Our services are provided only on demand/request by users.
Copyright © 2023 | All Rights Reserved.