Netgear EX6100 Setup | AC750

Does your WiFi connection drop when you move to the kitchen from the bedroom? Getting full signal strength at the ground floor but no WiFi at terrace? If so, opt for Netgear EX6100 setup. With the innovative AC WiFi technology, the Netgear AC750 EX6100 extender optimizes your current internet range and extends it to hard-to-reach areas.

This page will walk you through a step-by-step guide on how to setup Netgear EX6100 AC750 WiFi range extender. Let's take the plunge.

Netgear AC750 Setup Using the WPS button

WPS is the easiest way to perform the Netgear AC750 setup. Just a few steps below and you are done:

  • In the first place, make sure that your Netgear EX6100 WiFi range extender is properly plugged into a wall outlet.
  • Locate the WPS button on your Netgear EX6100 extender.
  • Press and hold the WPS button on your EX6100. The WPS LED on your range extender will blink.
  • The WPS LED on your Netgear EX6100 extender will turn solid green and the 2.4 GHz (Gigahertz) Link Rate LED will light up.

Note: If your existing WiFi router supports the 5 GHz (Gigahertz) band, simply repeat steps 1 and 2 and connect your Netgear EX6100 extender to the 5 GHz (Gigahertz) band.

If you are still unable to perform the Netgear EX6100 setup using WPS, feel free to get in touch with our technical experts.


Netgear EX6100 Manual

When you buy a brand new Netgear EX6100 AC750 WiFi range extender, you get a manual with it. The Netgear EX6100 AC750 extender manual consists of a series of installation steps from beginning to the end. You simply have to follow the instructions given on it to make your Netgear EX6100 extender working.

However, understanding the Netgear EX6100 manual can be difficult for a newbie. If you want to install Netgear EX6100 WiFi extender without any hassle, contact our professionals now.

Netgear AC750 EX6100 Setup Using Netgear Installation Assistant

To perform Netgear AC750 EX6100 setup using Netgear installation assistant, do the following:

  1. Plug your Netgear EX6100 range extender into an electrical outlet near to your existing WiFi router.
  2. The Power LED on your Netgear EX6100 extender becomes solid green.
  3. Connect your computer or laptop to a WiFi network.
  4. Launch a web browser on it.
  5. Enter or in the address field of the web browser.
  6. The New Extender Setup page displays.
  7. Complete the fields on the extender setup screen and click on the Next button.
  8. Click on the WiFi range extender button and click on the Continue button.
  9. Select your existing WiFi router's network to extend and click on the Next button.
  10. Type the network password in the network key (password) field and hit the Next button.
  11. Set the SSID or network name for your Netgear EX6100 extender and click on the Next button.
  12. Connect your WiFi-enabled devices to your Netgear WiFi range extender and click on the Continue button.
  13. Now, a message will be displayed confirming that your Netgear EX6100 extender is connected and ready.
  14. Click on the Next button.
  15. Complete the registration fields and click on the Finish button to complete the Netgear EX6100 setup process.

Unplug your Netgear EX6100 WiFi range extender and move it to a new location as per your preference. Got stuck at any step? Let our highly-experienced technicians help you out.

How to Update Netgear EX6100 Extender Firmware?

Does your Netgear EX6100 WiFi extender start behaving weirdly? Is your Netgear extender not providing the required speed even after a successful Netgear AC750 EX6100 setup? If yes, then update Netgear EX6100 extender firmware right away.

Here's how to update Netgear EX6100 extender's firmware:

  • Plug your Netgear AC750 WiFi range extender (EX6100) into a working wall outlet.
  • Launch a web browser on a computer or laptop.
  • Type mywifiext into the browser's address bar.
  • The Netgear EX6100 extender login page will display.
  • Select Settings and then the Firmware Update option.

If the new firmware version is available, follow the instructions given on the screen and update your Netgear EX6100 extender's firmware.


Still Facing Any Issue During Setup? Contact Us via Chat or Email.

Common Netgear EX6100 Extender Setup Issues

  1. Netgear EX6200 range extender not working
  2. Cannot find the EX6100 extender's network name (SSID) and password
  3. The power LED lights are not stable
  4. Unable to enable MAC address filtering
  5. EX6100 WiFi extender connected but no internet
  6. Cannot connect to Netgear EX6100 extender
  7. Invalid username and password
  8. Unable to reset Netgear EX6100 WiFi range extender
  9. Netgear Genie setup continues to appear even after Netgear EX6100 extender setup
  10. not working
  11. Unable to update Netgear EX6100 extender's firmware
  12. Can't access the Netgear AC750 login page
  13. Not getting redirected to the Netgear Genie setup page
  14. Incorrect IP address
  15. Errors while accessing,, and mywifiext.local

How to Enable FastLane technology on Netgear EX6100?

The FastLane technology offers you the maximum WiFi performance. Additionally, it provides high-speed of the internet with a dedicated band connecting your Netgear EX6100 extender and your WiFi-enabled device, and a second band connecting your range extender and your WiFi router. Follow the steps below to enable the Fastlane technology on your Netgear EX6100 WiFi range extender.

  1. Open a web browser on a computer or laptop and type into its address bar field.
  2. Enter the username and password. If you have not personalized your login details yet, make use of the default login credentials.
  3. Click on the FastLane Technology radio button.
  4. Now, you will get two options. You have to select any one of the following: Device-to-extender in 5GHz (Gigahertz) only and extender-to-router in 2.4GHz (Gigahertz) only.
  5. At last, click on Apply to save the settings.

If you got stuck at any step while enabling the Fastlane technology, then without any hesitation, get in touch with our professionals now.

How to Fix Netgear EX6100 Setup Issues?

Go through a few easy troubleshooting steps given below to fix common Netgear EX6100 AC750 extender setup issues.

  • Make sure that your Netgear EX6100 WiFi extender is receiving proper power supply.
  • The web URL, mywifiext or the default IP address of Netgear EX6100 extender must be entered correctly into the address bar, instead of the search bar field of the internet browser.
  • Do not use damaged Ethernet cables to connect your devices with each other.
  • Be certain to connect your router and your Netgear EX6100 WiFi range extender properly with each other.
  • Ensure that your Netgear EX6100 is placed within the reach of your existing WiFi router.
  • Change the default login details after the new Netgear EX6100 extender setup process. It is also recommended, change your extender's and your WiFi password in a month or two.
  • Update your Netgear EX6100 extender firmware periodically.
  • Avoid placing your Netgear EX6100 WiFi range extender near thick walls, microwave ovens, juicers, mixer grinders, treadmills, cordless phones, Bluetooth speakers, electronic toys, metal appliances, aluminum studs, security alarms, etc.
  • Use the latest version of the internet browser to access setup and login page.

If the above-mentioned troubleshooting tips do not resolve the Netgear EX6100 setup issues, chat with our professionals now. Our professionals are 24x7 available to help you.